54 images in album, page 4 of 5 | |||
|< first | << previous | next >> | last >| |
Crank case, with tapped cylinder mounting holes I was able to bore the cylinder holes with the tool I made. It cut very well after a little more grinding, and dropping the spindle down to the slowest speed! Tue, Apr 20th 2004 (1:39 AM) 800x600 1600x1200 Also in: Wil's Machine Shop | Machinging the bearing case I used 2" square aluminum for the bearing case to prevent waste, so it came out about .1" undersize, but it's not critical Tue, Apr 20th 2004 (9:59 PM) 800x600 1600x1200 Also in: Wil's Machine Shop | Turning the bearing case Here the bearing case blank (already reamed) is bolted on the crank case to turn the tapered outer surface Tue, Apr 20th 2004 (10:35 PM) 800x600 1600x1200 Also in: Wil's Machine Shop |
Bearing case after turning and polishing Tue, Apr 20th 2004 (11:23 PM) 800x600 1600x1200 Also in: Wil's Machine Shop | Center drilling bearing case attachment holes Note the use of a center drill in a collet. There was not enough clearance to do this with a drill chuck Tue, Apr 20th 2004 (11:47 PM) 800x600 1600x1200 Also in: Wil's Machine Shop | Starting the bearing housing Wed, Apr 21st 2004 (9:14 PM) 800x600 1600x1200 Also in: Wil's Machine Shop |
Turning the valve housing Wed, Apr 21st 2004 (9:14 PM) 800x600 1600x1200 Also in: Wil's Machine Shop | Turning the bearing housing Thu, Apr 22nd 2004 (12:17 AM) 800x600 1600x1200 Also in: Wil's Machine Shop | Turning the valve housing Thu, Apr 22nd 2004 (12:17 AM) 800x600 1600x1200 Also in: Wil's Machine Shop |
Milling the valve housing Thu, Apr 22nd 2004 (12:58 AM) 800x600 1600x1200 Also in: Wil's Machine Shop | Milling the flats on the bearing housing Thu, Apr 22nd 2004 (12:58 AM) 800x600 1600x1200 Also in: Wil's Machine Shop | Assembly Thu, Apr 22nd 2004 (3:12 AM) 800x600 1600x1200 Also in: Wil's Machine Shop |
54 images in album, page 4 of 5 | |||
|< first | << previous | next >> | last >| |